The
Nova large diaphragm condenser microphone
is perfect for vocal performance, broadcast, acoustic instruments and amplifiers.
High degree of clarity for any voice or instrument applications
Professional hand-built double sided 34mm large-diaphragm capsule for full, open-sound and unsurpassed audio quality and flexibility
Switchable polar patterns: figure 8, omni-directional and cardioid
– 10 dB switchable pad
Low cut filter
Ideal as a primary or support microphone for a variety of recording situations
Perfect for vocals and acoustic instruments
Pressure-gradient transducer with shock-mounted capsule
Top-quality components including Wima capacitors and Fairchild resistors
Ultra-rugged construction with electroplated finish
Suspension shock mount and innovative zero-hassle magnetic slip-on pop filter included
Metal storage carry case
Specifications:
| Spec | |
| Transducer Type | Electrostatic |
| Operating Principle | Pressure Gradient |
| The diaphragm’s active diameter | 34 mm |
| Frequency Range | 20 Hz to 20 kHz |
| Polar pattern | Cardioid, Figure 8, Omnidirectional |
| Sensitivity(dB re iV/Pa) | (-37dBV/Pa)(-40dBV/Pa)(-38dBV/Pa) |
| Sensitivity at 1 kHz into 1000 Ω load | (-14,10,12.5)mV/Pa |
| Output impedance | 50Ω |
| Rated load impedance | 1000Ω |
| Suggested load impedance | > 500Ω |
| Maximum SPL for 0,5% THD at 1000Ω load | 144dB/ 147dB/ 147dB |
| S/N Ratio DIN/IEC 651 A-weighted | 78dB/ 75dB/ 75dB |
| Dynamic range of the microphone preamplifier | 128dB |
| Phantom powering voltage on pin 2&3 of XLR: | +48V (+/-4V) |
| Current consumption | ≤ 4mA |
| Output connector | 3-pin XLR male |
| Dimensions | 63mm x 60mm x 154mm |
| Weight | 0.394kg |
