MOZA Pro

MAP: $2,499.00

SKU: PG02 Category:

Gimbal with up to 10kg max payload, with Professional Packaging include Thumb Controller+ Power Distribution Unit+ Tuning Stand +D-TAP Cable;

*If you have an account with us, please login to place an order.

The MOZA Pro 3-Axis Gimbal is designed for full-size cine cameras weighing up to 22 lb, and supports small- and mid-sized DSLRs and mirrorless cameras.

The MOZA Pro features three brushless motors with responsive sensors and high-resolution position encoders integrated into each one for precision adjustment of the camera’s motion. Upon detecting any movement, the sensors measure and pass the movement information to the processor for transferring signals. The MOZA Pro then uses advanced algorithms to apply these measurements and direct the motors to accurately control the pan, tilt, and roll directions.

The MOZA Pro offers three operation modes that you can switch between for optimal comfort in varying conditions. Underslung is the standard mode in which you hold the MOZA right in front of you at chest level. Upright, also known as Inverted mode, is the ideal choice when the subject is at or above eye level. Upright mode allows you to flip the MOZA upside down to achieve the best shooting angle possible in such cases. In Briefcase mode, you can carry the gimbal close to the side of your leg (like a briefcase) to capture movement near the ground or in narrow spaces.

The MOZA Pro is machined from solid magnesium aluminum and finished with a sleek and environmentally friendly coating. It’s robust yet lightweight at only 7.3 lb, and is designed to set up quickly and easily. The MOZA Pro has tool-less assembly and takes just three minutes to set up and adjust the balance.

Included with the gimbal is a MOZA Wireless Thumb Controller that provides you with numerous controls right at your fingertips. You can use it first-hand attached to the gimbal, or a second operator can control it from up to 328 ft away. The controller allows you to trigger camera recording and gimbal movement, change speed, adjust focus, and more.

The MOZA Pro runs for up to four hours using the included 2800 mAh battery. In addition, it houses a compact Power Distribution Unit on the bottom that can be used to supply power to accessories via a regulated USB connector and 12V DC port. You can power transmitters, follow focus units, and similar accessories. The Power Distribution Unit also offers a variety of expansion options.

The MOZA Pro also comes with the MOZA Assistant app (iOS/Android), which allows you to configure the gimbal over Bluetooth. It lets you tune parameters, view device information, perform sensor calibration, and control the keyboard. The MOZA Assistant software (Mac/Windows) is also included for upgrading firmware. The MOZA Pro is supplied with everything else you need to get started right out of the box.

Key Features

  • Designed for full-sized cine cameras up to 22 lb
  • Also supports small- and mid-size cameras
  • Three brushless motors with responsive sensors and high-resolution encoders
  • 360° continuous yaw axis
  • Underslung, Upright, and Briefcase modes
  • Includes MOZA Wireless Thumb Controller (328 ft range)
  • Solid magnesium aluminum construction
  • Four-hour operation with included 2800 mAh battery
  • Integrated Power Distribution Unit for powering accessories and expansion
  • MOZA Assistant app included (iOS/Android)

Supported Cameras
Virtually any camera from small- to full-sized weighing up to 22 lb is compatible, including:

  • Sony F55, FS5, FS7, FS100, FS700
  • Canon EOS 1D, C100, C300, C500, T5i
  • RED RAVEN, EPIC, DRAGON, SCARLET, WEAPON
  • ARRI ALEXA Mini, ALEXA M
  • Blackmagic Cinema Camera, URSA Mini

Wireless Thumb Controller
Supported cameras with Start/Stop recording control:

  • Canon 5D II, 5D III, 6D, 60D, 7D, 70D
  • Sony a7S, a7S II, a7R, a7R II
  • Panasonic GH4, GH3
  • Blackmagic Production Camera, Cinema Camera, Pocket Camera

Supported cameras with Focus control:

  • Canon 5D II, 5D III, 6D, 60D, 7D, 70D