Sontronics DrumPack Plus 7-Piece Condenser Microphone Set for Drums

MSRP: $1,208.90
MAP: $1,208.90

UPC: 5060173280642 SKU: STDRUMPACK+ Category:

*If you have an account with us, please login to place an order.

The new Sontronics DrumPack and DrumPack Plus pull together our award-winning DM-series drum microphones into two all-in-one, premium-quality miking options that no drummer or studio should be without.

The five- and seven-piece condenser microphone sets will give absolutely stunning results across your whole drumkit, plus they save you more than 30% on buying the mics individually!

Meanwhile the seven-piece DrumPack Plus (pictured below right and above left) includes a DM-1B, a DM-1S and three DM-1T as above plus a pair of STC-10 pencil condensers for use as overheads or for solo percussion miking.

Sontronics DM-series microphones were designed and developed over three years by founder Trevor Coley alongside top UK producers and drummers. Each microphone has been specifically tailored to capture the perfect sound from each of your drums and the mics have received rave reviews, awards and have appeared on the touring kits and studio set-ups of major drummers including Dave Grohl, Aerosmith’s Joey Kramer, Muse’s Dom Howard and Blur’s Dave Rowntree.

Sontronics DM-1B:
The DM-1B large-diaphragm, end-fire cardioid condenser microphone is superb at capturing the entire dynamic range of your kick drum, thanks to its high sensitivity, extremely low self-noise, -15dB attenuation pad and ability to handle up to 155dB SPL. The DM-1B delivers outstanding results on kick drum but also sounds fantastic on bass guitar cabinets, low brass and woodwind, tenor and baritone sax and even male vocals.

Sontronics DM-1S & DM-1T:
The DM-1S for snare and DM-1T for tom tom are small-diaphragm cardioid condenser mics each with a -10dB pad and SPL handling of up to 135dB. They have been designed with subtle variations in their response to suit the exact sound of your snare and tom, catching every element of your sound from the crack of the first hit to the rattle and snap of the snare and the boom and resonance of your tom tom. Together with the DM-1B, they combine to deliver exceptional results on your drumkit, whether recording in the studio or performing in a live environment.

Sontronics STC-10:
The STC-10 cardioid condenser microphones (two of which are included in the DrumPack Plus set) boast two-stage pad and filter controls and an extremely precise response with Sontronics’ signature smooth high-frequency roll-off. As a pair they are amazing as drumkit overheads, but they also sound stunning whether used individually for solo percussion, woodwind or stringed instruments, but also together for stereo-miking acoustic guitar, piano and ensemble.

Recommended for
• Drumkit and percussion
• DM-1B: kick drum, orchestral bass drum, bass guitar cabinet, low brass and woodwind, tenor/baritone sax, male vocals
• DM-1S: snare drum, cajon, djembe
• DM-1T: tom toms, bongos, congas
• STC-10: overheads, stereo miking, acoustic guitar, individually for solo percussion, solo strings, theatre, video


  • Award-winning condenser mics
  • Designed specifically for drums
  • All you need for recording full kit
  • Supplied with mic clips and rugged ABS fightcase


DM-1B Microphone

  • Polar pattern – Cardioid
  • Pad – 0dB, -15dB
  • Frequency response – 20Hz – 20kHz
  • Sensitivity – 6mV/Pa -45dB +/-2dB (0dB = 1V/Pa @ 1,000Hz)
  • Impedance – <=200 Ohms
  • Equivalent noise level – 14dB (A-weighted)
  • Max. SPL – 155dB (with -15dB pad switched in) (for 0.5% THD @ 1,000Hz)
  • Power – Phantom power 48V required
  • Connector – 3-pin XLR
  • Dimensions – 5.6 x 2.8 x 2.8″ (144 x 72 x 72mm)
  • Weight – 28 oz (804g)

DM-1S & DM-1T Microphone

  • Polar pattern – Cardioid
  • Pad – 0dB, -10dB
  • Frequency response – 30Hz – 20kHz
  • Sensitivity – 8mV/Pa -42dB +/-2dB (0dB = 1V/Pa @ 1,000Hz)
  • Impedance – <=200 Ohms
  • Equivalent noise level – 14dB (A-weighted)
  • Max. SPL – 135dB (with -10dB pad switched in) (for 0.5% THD @ 1,000Hz)
  • Power – Phantom power 48V required
  • Connector – 3-pin XLR
  • Dimensions – 3.7 x 0.86 x 0.86″ (95 x 22 x 22mm)
  • Weight – 3.1 oz (90g)

STC-10 Microphone

  • Polar pattern -Cardioid
  • Pad -0, -10db
  • High-pass – filter linear, 75Hz
  • Frequency response -30Hz – 20kHz
  • Sensitivity – 11mV/Pa -39dB +/-2dB (0dB = 1V/Pa @ 1,000Hz)
  • Impedance – <=200 Ohms
  • Equivalent noise level – 18dB (A-weighted)
  • Max SPL – 130dB (for 0.5% THD @ 1kHz)
  • Power source – 48V +/-4V phantom power required
  • Connector – Three-pin XLR
  • Dimensions – 5.9 x 0.8 x 0.8″ (150 x 21 x 21mm)
  • Weight – 4.2 oz (120g)